TYTAN Strong Bond is formulated to meet the needs of thousands of projects and purposes. It’s no odor formula is perfect for any interior project you have. It provides a strong and durable bond on most construction materials. It may be used on vertical and horizontal applications and should typically be used with mechanical fasteners. It provides a superior wood to drywall bond to eliminate nail pops and loose boards. It resits normal vibrations, weather, UV radiation, extreme climate changes, or extreme temperatures. With TYTAN Strong Bond you can Build with Confidence!
Surface area must be fully cured, dry, clean, and free of dust, oil, grease, debris, contaminants, or release agents that could interfere with proper adhesion. It is recommended to perform and evaluate preliminary adhesion and compatibility tests before use. For proper surface preparation techniques visit the “Try TYTAN” section of TYTAN.com.
Cut nozzle at 45° to desired bead size, insert in caulking gun and apply in serpentine bead to desired area. Press the substrate firmly against the bead and hold. The substrate must be attached within 10 minutes after applying the bead. Use mechanical fasteners to secure the substrate. Please see the technical specification for acceptable application temperatures and other technical information.
TYTAN Strong Bond is a dispersion based adhesive. It can be cleaned with water and has a very low odor. It has strong adhesion to wood and porus materials. It is very easy to apply and works well on most common construction projects like adhering wood to wood, and drywall to wood. Strong Bond should typically be used with mechanical fasteners.
TYTAN Strong bond should not be used on metals and should not be subjected to intense or prolonged water exposure. It is also not compatible with bitumen, polyethylene, polypropylene, or polyamide.
Remove Adhesive with soap and water from gun and all tools before it cures and let dry to prevent any damage. Cured sealant can be removed with soap and water or with sharp tools, using caution.
Keep out of the reach of children. Wear safety glasses with side shields. Direct contact with eyes may cause slight to moderate irritation. In case of eye contact, flush thoroughly with water for at least 15 minutes. Seek immediate medical attention. In case of skin contact, wash affected areas with soap and water. If irritation persists seek medical attention. Move to fresh air if inhalation causes discomfort. Refer to MSDS for further information.
If you are not happy with the products performance please call 855-44-TYTAN or contact us at TYTAN.com.