Show menu
Marki  i Produkty

Brands & Products

Shield Bond Repair

TYTAN Shield Bond Repair is a fast curing high modulus & non-conductive polyurethane direct glazing adhesive. It is a solvent and odor free polyurethane product that is formulated to withstand the most extreme weather and automobile conditions. It won’t sag and it applies smoothly and evenly to prevent unnecessary cleanup. It may be used on all types of windshield installation. With TYTAN Shield Bond Repair you can Build with Confidence!

Benefits

  • Tool Time: 10 minutes
  • Tack Free Time: 15 minutes
  • Drive Away Time: 1 Hour (41-104F)
  • Fully Cured: 24 hours
  • Application Temperatures: 23°F-104°F
  • Working Temperature: -40°F-212°F
  • Storage conditions: 40°F - 77°F in a dry place
  • Shelf Life: 12 Months

Application instruction

Surface Preparation:

Surface area must be fully cured, dry, clean, and free of dust, oil, grease, debris, contaminants, or release agents that could interfere with proper adhesion. Shield Bond Cleaner & Primer should be applied to ensure proper adhesion. Please read all the application instructions on all products before application. Visit TYTAN.com for technical documents and further instructions.

Application:

  • Begin at the center of the lower glass border.
  • Apply a triangular bead to the edge of the glass or the windscreen body flange, using the specially shaped nozzle. A round bead must be avoided.
  • While applying, keep the gun at a 90° angle with respect to the glass surface.
  • The end of the adhesive beading must overlap the initial part by approx. ¾” in order to avoid infiltrations.
  • The new windscreen must be placed in position within 8-10 minutes. Apply light pressure all round perimeter of glass to ensure good contact. Keep vehicle doors and side windows open throughout glass installation.
  • Refit trims and moldings. Remove any excess adhesive before it hardens.
  • Product Technology:

    Polyurethane Adhesives offer a durable weather and waterproof seal. Shield Bond Repair offers a one component, easy to use solution with a triangular windshield specific applicator. It offers superior elasticity and cures fast. It has good adhesion and is resistant to aging. Polyurethane adhesives are solvent free, and non-corrosive. Please visit TYTAN.com for technical documents and to learn more about polyurethane adhesive technologies.

    Technology Limitations:

    TYTAN Shield Bond Repair works best when applied using our proven three step system. Choosing to not follow the cleaning and priming instructions will increase the likelihood of issues with the adhesion and seal. Please read the instructions fully and monitor all conditions like temperature, storage conditions, surface preparation, and application method to ensure a strong and quality bond.

    Clean Up

    Remove Adhesive off gun and all tools before it cures. Use TYTAN Foam Cleaner, turpentine, or extraction naphtha and let dry to prevent any damage. Cured sealant can be removed with sharp tools, using caution.

    Safety:

    Keep out of the reach of children. Wear safety glasses with side shields. Direct contact with eyes may cause slight to moderate irritation. In case of eye contact, flush thoroughly with water for at least 15 minutes. Seek immediate medical attention. In case of skin contact, wash affected areas with soap and water. If irritation persists seek medical attention. Move to fresh air if inhalation causes discomfort. Refer to MSDS for further information.

    If you are not happy with the products performance please call 855-44-TYTAN or contact us at TYTAN.com.

Logo Selena

© 2020 Selena Group. All rights reserved.