TYTAN All-Purpose Silicone is an innovative, versatile product that is a handyman must-have. It is a cost effective silicone designed for interior and exterior use. It is perfect for high-humidity environments since it offers a long-term watertight seal that won’t mold, mildew, discolor, slump, or shrink. It may also be used for sealing trim with its flexible, strong seal. It won’t break down because of weather, UV radiation, or minor ware. It provides a strong seal and bond to most non-porous surfaces so you can be confident that it will seal every project, every time. With TYTAN All-Purpose Silicone you can Build with Confidence!
Surface area must be fully cured, dry, clean, and free of dust, oil, grease, debris, contaminants, or release agents that could interfere with proper adhesion. It is recommended to perform and evaluate preliminary adhesion and compatibility tests before use. For more information visit the “Try TYTAN” section of TYTAN.com.
Cut nozzle at 45° to desired bead size, insert in caulking gun and apply to desired area. Tool bead with moistened cloth and wipe off excess before it cures. For best results, tool immediately after applying for best adhesion and smooth finish before skinning occurs. Please see the technical specification for acceptable application temperatures and other technical information.
Acetoxy Silicone releases acetic acid when curing and cures to a strong durable seal. It is easier to apply and cures faster than other sealant technologies. It is superior in colder temperatures and will remain watertight and won’t crack or slump over time. It is UV and Weather resistant and can withstand the flexing and moving of typical construction and climate changes and movements. Acetoxy Silicone works very well on materials like glass, tile, and metal.
Acetoxy Silicone is not paintable and may corrode metallic surfaces or surfaces that are not compatible with acetic acid. It may stain, or discolor natural stones due to oil migration from the silicone. It may have residue run down when applied to non-porous panel facades It should not be used on most plastic surfaces.
Remove Sealant off gun and all tools before it cures. Use typical solvents such as Mineral Spirits or lacquer thinner (ethyl acetate, acetone) and let dry to prevent any damage. Cured sealant can be removed with sharp tools, using caution.
Keep out of the reach of children. Wear safety glasses with side shields. Direct contact with eyes may cause slight to moderate irritation. In case of eye contact, flush thoroughly with water for at least 15 minutes. Seek immediate medical attention. In case of skin contact, wash affected areas with soap and water. If irritation persists seek medical attention. Move to fresh air if inhalation causes discomfort. Refer to MSDS for further information.
If you are not happy with the products performance please call 855-44-TYTAN or contact us at TYTAN.com.